Availability: | |
---|---|
Quantity: | |
Multi Profiles
BMS
8455221000
Profile
Material | Applicable material | Galvanized sheet |
Material thickness | 1.0mm | |
With yield strength | Q235Mpa | |
Coil | Feeding width | 300mm |
Coil ID range | 508mm±30mm | |
Capacity | Max. 3 Tons. | |
Machine | Base Frame | H350 type steel by welding. |
Side wall thickness | Q235 t18mm | |
Roller Material | 40Cr Steel, Heat Treatment | |
Roller station | 14-steps to form | |
Shaft diameter | ф60mm,High Frequency Processing | |
Cutter | Hardness | Heat treatment to HRC58-62 degree |
Cutting tolerance | ≤±1mm | |
Power | Driving way | Gear/Sprocket transmission |
Main motor | 5.5KW, Frequency Speed Control | |
Pump motor for cutter | 4.0KW | |
PLC Control System | Inverter | Schneider Electric/DELTA (Taiwan brand) |
Touch Screen | WEINVIEW(Taiwan brand) | |
Encoder | KOYO (Japan brand) or OMRON (Japan brand) | |
Control Voltage | 24V |
1. Change by spacer:Produce different product size with changing spacers
2. With hydraulic 45 degree angle shearing device, to meet the different needs of customers.
3T Manual Decoiler→Feeding Guide Device→Roll Forming System→Hydraulic 45 degree angle shearing device→ Hydraulic Post Cutter Device→Exit Rack
Technical specifications
1) 3T Manual Decoiler:one set
Un-powered, Manually control steel coil inner bore shrinkage and stop
Max Feeding width: 300mm, Coil ID range 508mm±30mm Capacity: Max. 3 Tons
2) Feeding Guide Device
3) Main Machine
Body frame made from H350 type steel by welding.
Rollers manufactured from Cr12 steel, CNC lathes,Heat Treatment,hard Chrome Coated.
Main Motor=5.5KW, Frequency speed control.
4) Hydraulic 45 degree angle shearing device
5) Post Hydraulic Cutting Device
Post to cut, stop to cutting,Two pieces type of cutting blade design, no blanking.
Hydraulic motor: 4KW ;Cutting pressure: 0-16Mpa
Cutting tool material: Cr12MoV(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree.
The cutting power is provided by the independent engine hydraulic station.
6) Exit Rack:
7) Product Show
Packing method:Main body of machine is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.
After-sale Service
1. The warranty is 24 months after the client receives the machine.
Within the 24 months, we will courier the replacement parts to the client free of charge.
2. We offer technical support for the entire life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories with extra cost.
Profile
Material | Applicable material | Galvanized sheet |
Material thickness | 1.0mm | |
With yield strength | Q235Mpa | |
Coil | Feeding width | 300mm |
Coil ID range | 508mm±30mm | |
Capacity | Max. 3 Tons. | |
Machine | Base Frame | H350 type steel by welding. |
Side wall thickness | Q235 t18mm | |
Roller Material | 40Cr Steel, Heat Treatment | |
Roller station | 14-steps to form | |
Shaft diameter | ф60mm,High Frequency Processing | |
Cutter | Hardness | Heat treatment to HRC58-62 degree |
Cutting tolerance | ≤±1mm | |
Power | Driving way | Gear/Sprocket transmission |
Main motor | 5.5KW, Frequency Speed Control | |
Pump motor for cutter | 4.0KW | |
PLC Control System | Inverter | Schneider Electric/DELTA (Taiwan brand) |
Touch Screen | WEINVIEW(Taiwan brand) | |
Encoder | KOYO (Japan brand) or OMRON (Japan brand) | |
Control Voltage | 24V |
1. Change by spacer:Produce different product size with changing spacers
2. With hydraulic 45 degree angle shearing device, to meet the different needs of customers.
3T Manual Decoiler→Feeding Guide Device→Roll Forming System→Hydraulic 45 degree angle shearing device→ Hydraulic Post Cutter Device→Exit Rack
Technical specifications
1) 3T Manual Decoiler:one set
Un-powered, Manually control steel coil inner bore shrinkage and stop
Max Feeding width: 300mm, Coil ID range 508mm±30mm Capacity: Max. 3 Tons
2) Feeding Guide Device
3) Main Machine
Body frame made from H350 type steel by welding.
Rollers manufactured from Cr12 steel, CNC lathes,Heat Treatment,hard Chrome Coated.
Main Motor=5.5KW, Frequency speed control.
4) Hydraulic 45 degree angle shearing device
5) Post Hydraulic Cutting Device
Post to cut, stop to cutting,Two pieces type of cutting blade design, no blanking.
Hydraulic motor: 4KW ;Cutting pressure: 0-16Mpa
Cutting tool material: Cr12MoV(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree.
The cutting power is provided by the independent engine hydraulic station.
6) Exit Rack:
7) Product Show
Packing method:Main body of machine is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.
After-sale Service
1. The warranty is 24 months after the client receives the machine.
Within the 24 months, we will courier the replacement parts to the client free of charge.
2. We offer technical support for the entire life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories with extra cost.