The power supply must be cut off first When there is a demand to adjust the pressure tile roll forming machine. Pay more attention to the safety of your hands when inspecting and repairing the moving parts of each part of the tile roof roll forming machine. Before starting to operate the tile roof roll forming machine, be sure to observe whether the connections of the various components of the tile roof roll forming machine are tight or not. Whether the nuts, bolts, and nuts are loose or not locked. And before starting the machine for trial operation, add enough lubricating oil.

When starting up and running, observe the components of the roller rolling assembly to see if there is any abnormal vibration card or noise, and whether the movement of each part is coordinated. Only after all the parts are normal, only batches can be used to speed up the production of plates. In the process of high-speed production and operation of the tile roof roll forming machine, if any irregular device is found, the operator must cut off the power supply immediately and shut it down for inspection.

1. The tile roof roll forming machine should be equipped with an electronic control system with a high digital pulse input function for corresponding use. (Such as Schneider) The high input performance is excellent, the AB phase anti-interference ability is strong, and the fixed value interrupt function is used to ensure accuracy.

2. Testing parts of the electric control system of tile roof roll forming machine: testing pulse encoder, up and down running program switch, up and down running program button, emergency stop, standby switch, hydraulic start and stop switch, etc.

3. The hydraulic and pneumatic components of the tile roof roll forming machine include a high-frequency inverter drive servo motor, a pneumatic hydraulic station motor, two hydro-pneumatic solenoid valves for profiling, and two solenoid valves for driving hydraulic post-shearing.

4. The programmable PLC control system has 14 inputs/10 relay outputs, which just meet the input and output requirements. Through the touch screen electronic control panel screen, the production quantity, production speed, and other parameters can be set. Help users of tile roof roll forming machines to more comprehensively regulate production data settings.

The thickness of the steel for the frame specification of the tile roof roll forming machine is the rated thickness of the frame lathe Q235 steel plate, and the steel used must be a steel plate without hard marks, welding slag, and welding seams allowed to be too thick. The rotating parts of the machine tool roller assembly should be regularly lubricated. The operator should add lubricating oil once a week. The mechanic adds lubricating oil to the rotating bearing part every six months, which can better ensure the long-term non-destructive application of the tile roof roll forming machine.